Joe,
Our windmill is working perfectly.  Thank you.  You were so helpful and sold us a great product.  Our pond is clear and our fish are healthy.  Thanks again.  We will recommend you to everyone.
Larry and Nancy Klocke. Waukon Iowa. Purchase date 05 / 16 / 2010

Joe,
    Windmill doing fine and the pond water looking better daily. In two weeks its
hard to believe its cleaned up so well. Gusts to 40 mph today and not a problem,
just more bubbles !  Our historical group is very happy with your American Eagle.
     Thanks for all your help on the purchase and installation. Many lookers and
many pictures have been taken. Hope we can send you some customers soon.
                                               Regards,  Ron and Carol Klingel

A LOT OF PEOPLE THOUGH IT WAS REALLY NICE IF YOU NEED TO HAVE ANY CUSTOMER TO LOOK AT IT ITS ON OUR GOLF COURSE IN BANCROFT IOWA. I WOULD RECOMMEND IT TO EVERYONE VERY NICE. ENCLOSED ARE PICTURES OF IT ON OUR GOLF COURSE. Richard Arndorfer

Joe it is great to be a customer of yours and American Eagle. Sadly customer service is a thing of the past in most of our great country, but your service is the best I have seen in a number of years.
You and American Eagle should give lessons in customer service!!!!!
Thank You;
James Dean B.

Dear Joe,
Just wanted to take a moment to recap how Menno and his team at the factory took care of me after my windmill fell down over the winter in Northern Illinois.
As you may remember, I had a ******** brand windmill originally that the compressor went bad on. The tower was OK, so I purchased an American Eagle conversion kit. The cone at the top of the tower must have been worn, because it wobbled more than it should have and intimately fell down. The American Eagle compressor was still working fine until everything fell off the tower.
 I now am the proud owner of a complete American Eagle 23’ tower and compressor and everything is working great. I can tell from assembling the windmill that the quality and workmanship are head and shoulders above the ******** brand.
The factory rush shipped the kit on short notice to get me up and running quickly. In addition, Menno made follow-up calls to be sure I received everything and provided some tips on assembly and erection of the tower.
All in all I couldn’t be happier with the product and equally with the great sales service I experienced from you, Menno, and the entire American Eagle family.
I would highly recommend the American Eagle Company and products to anyone.

Sincerely,
Larry Kendzora. Maple Park, IL.

I am a machinist and this design looks very sound. I see great potential with blade improvements and a shroud (Options). The .250" thick wheel and hub assembly is a huge plus for many reasons. 1st it is tough as hell and 2nd Centrifugal-Mass acts ass flywheel. I love the bearing set-up too. Combine this with Solar and Battery Backup and oh yeah, you have a grid-buster.
Thank's for keeping Americana American.


Hello Mr. Joe,
     I just wanted to say thank you for such a wonderful windmill. It was everything you said it would be and works fantastically. If you ever need a referral for the American Eagle, please let me know. By the way, I built forms for concrete prior to erecting the windmill and then elevated the windmill above the height of the forms for pouring concrete. Worked great! Too easy!
 
Thanks,
Preston W. White
Preston W. White, CSMP

Joe, I purchased the 33ft. mill in September 2013. Just wanted to let you know that the installation was relatively easy and the mill is working as advertised and I am enjoying it very much. Glad I purchased it. Thanks for all your help. I'll steer anyone who asks about it your way.
                                                                 John A. Sherman                                                        
Dear Joe,

Just a note to tell you how your American Eagle windmill saved my pond this winter.
I purchased it from you in February of last year and had it delivered in April.  With
a wet spring I didn't get it put up until July.
We experienced one of the coldest and snowiest winters in northeast Iowa.  It started
snowing the first of December and accumulated over 50 inches of snow with 50+
days of below zero temperatures.  My pond which is normally about 12 feet deep
froze up at about 8 feet due to the drought we had.
It is the first part of April and the ice finally went out of my pond.  Four months with 20
inch snow covered ice and no aeration are experiencing 100% fish kill.  Mine is just
fine!!  Thanks for a great product!
Sincerely,

Gary Foster
Manchester, IA

Feel free to use them in your advertising if you would like. I can mail you a larger vs. of the file if you need. Thanks I am amazed how much better your wind mill is than anything that is available or sold in this area.  Dennis W.
 I thought you might enjoy a couple more photos.  This windmill is far superior to any other competitors windmill in our area.  The amount of air it puts into my pond is incredible.  Plus it just looks better.

Thanks
Dennis Wy.
Allenton, MI.  

P.S.  If you have any potential customers from Michigan that are interested in seeing your windmill in action please feel free to use me as a reference.

Joe, 
Thank you checking in. Bruce is actually my father, a simple country man who has not yet bought in to the internet craze. I helped him with this purchase. What sold him was the fact that your product is American made! He's proudly shared that with others who have inquired about the windmill. I assisted him with the assembly this summer and it has worked as advertised ever since. Where he lives in Maine they were not hit by the extreme parts of our recent tornados, hurricane, or snow, however the steady winter snow is on the way. I'm confident it will hold up to the weather, but we'll let you know if there are any challenges. What he's hoping for is that it will provide the air necessary to keep his stocked trout alive through dry summers. Last year he lost his fish which is what led to the investment this summer. Again, we appreciate you checking in and for making a quality American made product!
Take care,  Troy

We are very satisfied with the windmill. Works perfectly. We could use a little more rain to fill up the pond. Please see what you can do about that! Would be happy to give a reference. Your customer can come and see ours. Fred Seamark Ranch.

We are absolutely satisfied with the windmill and service.  My contact info is below and a map is attached.  The cell number is best.  If I’m out then you can talk with Dan.  Come by when you can, and we might like to see your tilapia set up sometime, too.  Thanks for the reference on Marty.
  
We wanted to thank you for shipping our windmill out so quickly.  We three sixty + year old ladies put it together and solicited a few neighbors to help stand it up.  We installed it on a concrete pad with loop anchors and large turnbuckles bolted to the legs.  We love it!  It works great when the wind blows and I'm sure our fish will appreciate it too!  What a well built quality product.  Now we have a piece of Americana in our backyard!

Sincerely,

Nancy Fennell

I ordered an American Eagle windmill and it had some mechanical issues after about six months, I called and explained the problem, provided pictures and had all the parts i needed to fix the problem in less than a week, free of charge. I am very pleased with the fast and friendly service that was provided. I would recommend An American Eagle windmill to anybody in the market, The product and service is top of the line! Shawn S.

I feel that I must write you and thank you for the product you are selling.
We finally have clear water in our pond!  I know you mention this on your
website,
but I was skeptical when ordering.   I have tried all sorts of chemicals
with no success.
We have had the wind mill up and running for less than a month and there is
a huge difference in the clarity of the water.  I can actually see the
bottom most of the way out in the pond.

Again, Many thanks.

Sherif Tewfik

I would recommend An American Eagle windmill to anybody in the market, The product and service is top of the line! Shawn S.


I am a machinist and this design looks very sound. I see great potential with blade improvements and a shroud (Options). The .250" thick wheel and hub assembly is a huge plus for many reasons. 1st it is tough as hell and 2nd Centrifugal-Mass acts ass flywheel. I love the bearing set-up too. Combine this with Solar and Battery Backup and oh yeah, you have a grid-buster.
Thank's for keeping Americana American.


Hello Mr. Joe,
     I just wanted to say thank you for such a wonderful windmill. It was everything you said it would be and works fantastically. If you ever need a referral for the American Eagle, please let me know. By the way, I built forms for concrete prior to erecting the windmill and then elevated the windmill above the height of the forms for pouring concrete. Worked great! Too easy!
 
Thanks,
Preston W. White
Preston W. White, CSMP

Joe, I purchased the 33ft. mill in September 2013. Just wanted to let you know that the installation was relatively easy and the mill is working as advertised and I am enjoying it very much. Glad I purchased it. Thanks for all your help. I'll steer anyone who asks about it your way.
                                                                 John A. Sherman                                                        
Dear Joe,

Just a note to tell you how your American Eagle windmill saved my pond this winter.
I purchased it from you in February of last year and had it delivered in April.  With
a wet spring I didn't get it put up until July.
We experienced one of the coldest and snowiest winters in northeast Iowa.  It started
snowing the first of December and accumulated over 50 inches of snow with 50+
days of below zero temperatures.  My pond which is normally about 12 feet deep
froze up at about 8 feet due to the drought we had.
It is the first part of April and the ice finally went out of my pond.  Four months with 20
inch snow covered ice and no aeration are experiencing 100% fish kill.  Mine is just
fine!!  Thanks for a great product!
Sincerely,  Gary Foster: Manchester, IA


Joe, Thank you for your personal service. I wanted to let you know how pleased I am with not only my windmill but the way I was treated when I had a problem.
Great service and response, Thank you again a very satisfied customer.
Doug Klett


Joe, Yes very good service. Factory called right away told me what the problem was and what they had to fix it. They sent me a new stainless shaft and 3 new
Bearings they had in stock. I could not ask for any better service. Anyone can have a problem but it’s what the company and or dealer does to correct the
Problem that matters. I am very impressed and happy with my experience. Great job from you and the factory.
Thank you, Doug

Good morning Joe!! We have already purchased one from you last year and very happy with it. The shipping address is  Chemin Ste-Angelique St-Lazare J7t2n4.quebec canada.  Thank you, Anna 

Thank YOU, Joe...I know what you mean and you can always depend on me for spreading positive words about your product and terrific customer service! The photo attached shows the type of trout we are raising and this one is a Kamloops Rainbow at about 3 years of age. The fish farm/hatchery says that the reason my trout are doing so well is having the aeration provided by your windmill. Our trout are about a year and a half old and are upwards of 16 inches and are very fat.......Thanks again!!, Robert
Hi Joe. Bob Wrede here, I have all three windmills up that I got from you last week and they are working great. Your packaging, shipping time and product all met my expectation. Hopefully my fish are breathing easier too. Thanks
Joe. Thanks windmill works great. Great staff. Great instructions.  Moe. And Dakota

Joe,
I appreciate the thoughtfulness of your question! Yes, I have a 23’ American Eagle I bought from you 5 years ago. I absolutely love it! I recently built a garage and feel that the roof mount would improve on an already excellent system.
I get more comments on my system than i can count, and after 5 years, it still looks and performs as well as day one. Thank you for having such a great product, It’s not often you find quality anymore.
Zak Dake
Satisfied Windmill Owner

Hello Joe
We picked up our windmill on Friday and everything was in tack. We are very pleased with your companies professionalism in getting the product shipped and the quality of the windmill. I have started to put the unit together and am able to appreciate how well the unit has been manufactured. If you ever need a reference don't hesitate to ask.
All the best
Lee Diamond
Joe Mescan Windmills
Home of the #1 Pond Aeration Windmill in the World !
LOWEST PRICE GUARANTEED !
Home American Eagle Specs Order Online Bellow vs Diaphragm FAQ Warranty
Testimonials
Contact Us

Private Policy